Non-Compliant Balloon Catheter
- Non-Compliant Pressure Technology: Delivers accurate dilatation with minimal balloon growth, to reduce additional vessel injury during post-dilatation in unyielding fibrocalcified-type lesions.
- Controlled minimal balloon growth (5%) between NP & RBP for flat compliance
- High pressure catheter (RBP up to 20 atm)
- “One-Body” Tapered Tip Design: Seamless transition of tip-to-balloon for enhanced crossability
- Low Profile Tip: Ultra-low 0.016’’ Tip Entry Profile for crossing through expanded stents without snagging
- Ultraslim Bond Technology: Slim & seamless bonding interfaces minimizes balloon profiles & enhances balloon crossability
- Tri-Fold Ultra-Wrap Technology: Three-pleat design minimizes balloon profiles for enhanced crossability
- High Visibility: Two highly radiopaque Platinum-Iridium marker bands for enhanced visual alignment and catheter placement.
- Fully Transitioned Catheter Shaft: Fully integrated proximal to distal catheter shaft for optimal tactile feel and pushability
- Lubricity: Rontis’ proprietary hydrophilic coating, HiFlow, ensures smoother catheter navigation through even the most challenging and tortuous anatomy.
TECHNICAL DATA
InRo® NC Non-Compliant Balloon Catheter
| Mode of exchange: | Rx | |
| Baloon material: | modified polyamide | |
| Balloon compliance: | non-compliant | |
| Guiding catheter compatibility (min): | 5Fr | |
| Usable Catheter Length: | 140 cm | |
| Radiopaque markers: | 2, Pt-Ir | |
| Distal shaft (Rx): | 2.4F (Ø 2.00 mm) 2.5F (Ø 2.25 – 3.50 mm) 2.9F (Ø 4.00 – 5.00 mm) |
|
| Hypotube (Rx): | 2.0F | |
| Double lumen shaft (OTW): | 2.6F | |
| Entry profile: | 0.016’’ | |
| Guidewire compatibility (max): | 0.014” | |
| Nomimal pressure: | 10 bar | |
| Rated Burst Pressure (RBP): | 20 bar (Ø2.00 – 4.00 mm) 18 bar (Ø4.50 – 5.00 mm) |
|
| Coating: | Hydrophilic, HiFlow | |
| Maximum shelf life upon production: | 4 years |
User trainings are performed upon request. Due to confidentiality, for further user information/videos please contact us at endovascular@rontis.com.
